Quantcast
Channel: Melfast Inc. » Industrial Fasteners
Viewing all articles
Browse latest Browse all 37

Simple Tricks To Reduce Fastener Wastage In A Manufacturing Plant

0
0

reduce fastener wastage

In the manufacturing industry, one of the things you have to keep an eye on is reducing the costs of doing any manufacturing. This often increases the competitiveness of the facility, and is therefore something that is definitely worth pursuing.

Unfortunately, there are many issues that usually need to be sorted out when doing this, one of which is making sure that you minimize the loss attributable to fastener loss and damage. Remember that though fasteners such as Inconel center lock nuts and alloy 20 hex tap bolts might seem like minor parts of the manufacturing process, they can actually result in a major loss if they are not used properly.

The importance of auditing

One of the ways of avoiding this is by carrying out an audit regarding the types of fasteners used in any manufacturing facility. The best way to come up with an audit is to think about how the fasteners are used, and then thinking of a system that can be used to figure out whether they are used appropriately. In most engine manufacturing plants, for instance, each employee has a unique ID that they use to get fasteners from the spares section. If it turns out that a particular employee ends up using up too many fasteners during a particular time frame, they can then be audited to find out why. You can try out this and many other ways of auditing the use of the fasteners.

Make sure that your equipment is compatible with the fasteners

Another reason why you are likely to spend too much money on the fasteners is if it turns out that the machines used to put them in place are not of the correct type, or not calibrated properly. For instance, if you are using a hex lag bolt, you might need to subject it to a specific amount of torque for it to stay in place tightly. If you use too much force on it, it might end up breaking during the installation process. When this happens frequently enough, it could translate to massive losses.

This means that when investing in the machinery to be used in such a setting, you need to be very keen about the technical details of the fasteners you will be using in the facility. You should particularly pay attention to the tolerances that the fasteners should be subjected to, and ensure that you buy fastening tools that will not exceed this but will also not be too loose.

The use of all senses

Placing fasteners in place should not be an automatic process. It’s a good idea for your staff members to be able to identify problems using other senses including hearing and by touch. For instance, when they notice that the tone of a particular drill changes when they are using a specific batch of fasteners, it could indicate that either the drill is not working well, or that the fasteners are of low quality. Either way, identifying the problem in advance will make it easier to correct the problem early on.


Viewing all articles
Browse latest Browse all 37

Latest Images

Trending Articles





Latest Images